Eternity Power Solutions Private Limited
Eternity Power Solutions Private Limited, Gandhinagar, Gujarat
SEND SMS
SEND EMAIL
Product Details:
| Minimum Order Quantity | 10 Piece |
| Solar Array | Single Array |
| Application | Solar System Controller |
| Model | ETSLCC-30 |
Parameter | Description |
30-Amp Solar Charge Controller | Three stage battery charge monitoring algorithm |
Maximum charging current | 30 Ampere |
Protections | o Short circuit protection |
Mobile charging | USB port for controlled mobile charging - 1amp max |
Solar panel Dusk to Dawn operation (Optional) | NTTV (Night Time Threshold Voltage):3.0 volt DTTV (Day Time Threshold Voltage):3.9 volt |
Battery low, load disconnect voltage | 11.0 volt |
Battery full, load reconnect voltage | 12.5 volt |
Battery boost voltage set-point | 14.5 volt |
Battery float voltage set-point | 14.1 volt |
PWM frequency | 25 Hz |
Ideal current consumption | Less than 2ma |
Solar panel maximum open circuit voltage | 22.0 VDC |
Product Details:
| Minimum Order Quantity | 10 Piece |
| Solar Array | Single Array |
| Application | Lighting Controller |
| Model | ETSLSCLI-15 |
Parameter Description | Parameter |
LED driver methodology | Dual PWM dc-dc buck converter |
Charge controller methodology | Three stage battery charge monitoring algorithm |
Maximum charging current | 6.0 amp |
Maximum LED current (5watt to 15watt) | 1.4 amp |
LED driver efficiency | Greater than 90 percent |
Protections | o Short circuit protection o Battery over charge protection o Battery Deep discharge protection o PV reverse voltage polarity protection o Battery reverse voltage polarity protection o Software watch-dog for LED over current |
Solar panel Dusk to Dawn operation | NTTV (Night Time Threshold Voltage):3.0 volt DTTV (Day Time Threshold Voltage):3.9 volt |
Battery low, load disconnect voltage | 14.0 VDC |
Battery full, load reconnect voltage | 15.0 VDC |
Battery boost voltage set-point | 16.4 VDC |
Battery float voltage set-point | 16.4 VDC |
PWM frequency | LED driver: 30.53 kHz Charge controller: 25 Hz |
Ideal current consumption | Less than 2 mm |
Late night dimming mode | After five hour, 50 percent dimming(optional) |
Motion sensor | For customized order only |
Solar panel maximum open circuit voltage | 22.0 volt |
Solar panel maximum MPP voltage | 18.5 volt |
Supported battery types | Lithium Ion - 16.8 VDC |
Overall dimension | 60mm x 45mm x 25mm |
Mounting hole dimension | 52mm x 37mm |
Product Details:
| Minimum Order Quantity | 10 Piece |
| Load Type | DC |
| Model | ETSLCC-10LA |
| Solar Array | Dual Array |
Parameter | Description |
PWM Solar Charge Controller | PWM three stage battery charge monitoring algorithm |
Maximum charging current | 10 Amp / 12 amp / 14 amp |
Protections | o Short circuit protection |
Mobile charging | USB port for controlled mobile charging - 1amp max |
Solar panel Dusk to Dawn operation (Optional) | NTTV (Night Time Threshold Voltage):3.0 volt DTTV (Day Time Threshold Voltage):3.9 volt |
Battery low, load disconnect voltage | 11.0 volt |
Battery full, load reconnect voltage | 12.5 volt |
Battery boost voltage set-point | 14.5 volt |
Battery float voltage set-point | 14.1 volt |
PWM frequency | 25 Hz |
Ideal current consumption | Less than 2ma |
Solar panel maximum open circuit voltage | 22.0 VDC |
Product Details:
| Minimum Order Quantity | 50 Piece |
| Solar Array | Single Array |
| Application | Solar System Controller |
| Model | E6 |
Parameter Description | Parameter |
LED driver methodology | Dual PWM dc-dc buck converter |
Charge controller methodology | Three stage battery charge monitoring algorithm |
Maximum charging current | 6.0 amp |
Maximum LED current (5watt to 15watt) | 1.4 amp |
LED driver efficiency | Greater than 90 percent |
Protections | o Short circuit protection o Battery over charge protection o Battery Deep discharge protection o PV reverse voltage polarity protection o Battery reverse voltage polarity protection o Software watch-dog for LED over current |
Solar panel Dusk to Dawn operation | NTTV (Night Time Threshold Voltage):3.0 volt DTTV (Day Time Threshold Voltage):3.9 volt |
Battery low, load disconnect voltage | 12.0 VDC |
Battery full, load reconnect voltage | 13.0 VDC |
Battery boost voltage set-point | 14.3 VDC |
Battery float voltage set-point | 14.3 VDC |
PWM frequency | LED driver: 30.53 kHz Charge controller: 25 Hz |
Ideal current consumption | Less than 2 mm |
Late night dimming mode | After five hour, 50 percent dimming(optional) |
Motion sensor | For customized order only |
Solar panel maximum open circuit voltage | 22.0 volt |
Solar panel maximum MPP voltage | 18.5 volt |
Supported battery types | LiFePO4 - 12.8 VDC |
Overall dimension | 60mm x 45mm x 25mm |
Mounting hole dimension | 52mm x 37mm |
Product Details:
| Minimum Order Quantity | 10 Piece |
| Solar Array | Dual Array |
| Application | Solar System Controller |
| Model | ETSLCC-LF-08 |
Parameter | Description |
Solar Charge Controller | PWM three stage battery charge monitoring algorithm |
Maximum charging current | 08 amp |
Protections | o Short circuit protection |
Mobile charging | USB port for controlled mobile charging - 1amp max |
Solar panel Dusk to Dawn operation (Optional) | NTTV (Night Time Threshold Voltage):3.0 volt DTTV (Day Time Threshold Voltage):3.9 volt |
Battery low, load disconnect voltage | 12.0 volt |
Battery full, load reconnect voltage | 13.0 volt |
Battery boost voltage set-point | 14.3 volt |
Battery float voltage set-point | 14.3 volt |
PWM frequency | 25 Hz |
Ideal current consumption | Less than 2ma |
Solar panel maximum open circuit voltage | 22.0 Vdc |
Product Details:
| Minimum Order Quantity | 50 Piece |
| Model | E5 |
| Material | Aluminum, Metal |
| Power | 260 V |
Parameter Description | Parameter |
LED driver methodology | Dual PWM dc-dc buck converter |
Charge controller methodology | Three stage battery charge monitoring algorithm |
Maximum charging current
| 6 amp / 8 amp / 12 amp |
Maximum LED current (5watt to 42watt) | upto 3.5 ampere |
LED driver efficiency | Greater than 90 percent |
Protections | o Short circuit protection o Battery over charge protection o Battery Deep discharge protection o PV reverse voltage polarity protection o Battery reverse voltage polarity protection o Software watch-dog for LED over current |
Solar panel Dusk to Dawn operation | NTTV (Night Time Threshold Voltage):3.0 volt DTTV (Day Time Threshold Voltage):3.9 volt |
Battery low, load disconnect voltage | 11.0 VDC |
Battery full, load reconnect voltage | 12.5 VDC |
Battery boost voltage set-point | 14.5 VDC |
Battery float voltage set-point | 14.1 VDC |
PWM frequency | LED driver: 30.53 kHz Charge controller: 25 Hz |
Ideal current consumption | Less than 2 mm |
Late night dimming mode | After five hour, 50 percent dimming(optional) |
Motion sensor | For customized order only |
Solar panel maximum open circuit voltage | 22.0 volt |
Solar panel maximum MPP voltage | 18.5 volt |
Supported battery types | Lead acid battery: Gel, SMF, Tubular(12 volts) |
Overall dimension | 60mm x 45mm x 25mm |
Mounting hole dimension | 52mm x 37mm |
Product Details:
| Minimum Order Quantity | 50 Piece |
| Solar Array | Single Array |
| Application | Solar System Controller |
| Model | ETSLCC-LI-06 |
Parameter | Description |
Lithium Battery Charging Board | PWM three stage battery charge monitoring algorithm |
Maximum charging current | 06 amp |
Protections | o Short circuit protection |
Mobile charging | USB port for controlled mobile charging - 1amp max |
Solar panel Dusk to Dawn operation (Optional) | NTTV (Night Time Threshold Voltage):3.0 volt DTTV (Day Time Threshold Voltage):3.9 volt |
Battery low, load disconnect voltage | 14.0 volt |
Battery full, load reconnect voltage | 15.0 volt |
Battery boost voltage set-point | 16.4 volt |
Battery float voltage set-point | 16.4 volt |
PWM frequency | 25 Hz |
Ideal current consumption | Less than 2ma |
Solar panel maximum open circuit voltage | 22.0 VDC |
